1-800-269-2609| - En Español|
- Available 7 days a week
1-800-269-2609| RepairClinic Item # 1181075
Dryer thermistor. This thermistor should read approximately 11.9K Ohms of resistance at 70 degrees Fahrenheit (21’ Celsius). If the thermistor is defective, it may prolong or shorten the drying time or cause a fault code. A defective thermistor is not responsible for a dryer not heating.
OEM Part - Manufacturer #WP8577274
RepairClinic Item # 525385
Dryer moisture sensor bar. This moisture sensor monitors the clothing’s moisture level and sends a signal to the control board when the clothes are dry. If your moisture sensor is defective, the dryer may shut off too early or continue running for a while after the clothes are dry. Two required.
OEM Part - Manufacturer #WP3387223
RepairClinic Item # 2681
Gas dryer sensor for igniter and flame. The sensor is located across from the gas igniter at the dryer’s burner assembly. This flame sensor should be closed for continuity at room temperature. Check for continuity with a multi-meter before replacing.
OEM Part - Manufacturer #WP338906
RepairClinic Item # 1268224
Dryer moisture sensor bar. If the dryer timer does not advance properly inspect the moisture sensor bars for damage which can cause the automatic drying cycle to not work properly.
OEM Part - Manufacturer #6500EL3001A
RepairClinic Item # 2068429
Dryer thermistor. If the dryer displays a fault code the thermistor may be defective.
OEM Part - Manufacturer #DC32-00007A
RepairClinic Item # 1268206
Dryer thermistor assembly with wire harness. If the thermistor is defective, it can prolong or shorten the drying time or cause a fault code. A defective thermistor is not responsible for a dryer not heating.
OEM Part - Manufacturer #6323EL2001B
RepairClinic Item # 2069516
Dryer moisture sensor. The moisture sensor monitors the clothing’s moisture level and sends a signal to the control board when the clothes are dry. If your dryer turns off too early or continues running for a while after the clothes are dry, the moisture sensor might be damaged.
OEM Part - Manufacturer #DC61-02627A
RepairClinic Item # 1156925
Dryer thermistor. This thermistor should read approximately 50,000 (50K) Ohms of resistance at 77 degrees Fahrenheit. *Note that it is not in the heating circuit so it likely will not be the cause of a dryer heating problem. It can however effect cycle times or cause a fault if defective.
OEM Part - Manufacturer #134587700
RepairClinic Item # 2075741
Moisture sensor assembly
OEM Part - Manufacturer #DC97-08889A
RepairClinic Item # 3574
Flame sensor for gas dryer
OEM Part - Manufacturer #5303281135
RepairClinic Item # 1268234
Gas dryer flame sensor
OEM Part - Manufacturer #6501EL3001A
RepairClinic Item # 1475625
Inlet control thermistor.Resistence reading should be around 100K ohms at room temperature and decrease with temperature rise.
OEM Part - Manufacturer #WE4M398
RepairClinic Item # 2075744
Sensor guide
OEM Part - Manufacturer #DC97-08894A
