Dryer drum belt, length 88.75" x width 1/4". If the drum does not turn, but you can hear the motor running then there is a good chance the belt has broken.
Dryer rear drum bearing kit. The holes in the metal plate are not threaded. Use the self tapping screws in the kit to thread the plate. If the dryer is noisy then the rear bearing could be worn and require replacement.
Refrigerator water inlet valve assembly. If the icemaker or water dispenser no longer work the water valve may be defective.
Refrigerator crisper cover support post
Refrigerator ice maker kit. If the icemaker is not working make sure the freezer temperature is around zero degrees Fahrenheit. If so, the icemaker or water valve could be defective.
Ice maker assembly with cover and wire harness. Makes 8 radius ice cubes. If the mold where cubes are made is flaking or corroded it is time for a new ice maker assembly. *Use model number to find correct icemaker.
Dryer heating element and rear housing assembly. Before checking the heating element, first make sure that the thermal fuse is not defective. Normally, a heating element will have a break in the coil if defective.
Door strike/catch for front-loading washing machine. The washer door must be latched shut in order for the washer to start. If the door strike is damaged or defective, the washer door won't latch, and the washer will not be able to start.
Lower Spray Arm
Oven igniter with long wire harness. The igniter draws electrical current through the oven safety valve to open it. If the igniter glows for more than 90 seconds without igniting the gas flame, this indicates that the igniter is too weak to open the valve.
Refrigerator PURE Advantage air filtration system.
Oven temperature sensor
Dryer door catch kit. If the dryer does not latch properly then either the strike or catch is likely damaged and will need to be replaced.
Door lock & switch assembly
Refrigerator crisper cover support. Holds the crisper drawer cover in place.