Oven igniter kit. Can replace igniters for either bake or broil burners. Replaces shorter and longer igniters in many instances. Amperage range is 3.3 - 3.6. If the igniter glows for more than 90 seconds without igniting the gas flame, this indicates that the igniter is too weak to open the valve.
Oven ignitor, this item is also referred to as a glow bar. The igniter is mounted vertically on the burner tube. If the oven does not heat check if the igniter is glowing, if so then there is a good chance the igniter is weak and will need repalcement.
Bake or Broil Igniter. Match up the connector with old part. The plastic connector is male.
Dryer igniter with wire harness connecter. This is a flat-style igniter. The igniter uses heat to ignite the gas in the burner assembly. If the igniter is defective, the gas will not ignite and the dryer will not heat.
Oven Bake/Broil igniter. Horizontal mount with wire connector. If the oven does not heat check if the igniter is glowing, if so then there is a good chance the igniter is weak and will need replacement.
Spark electrode for the surface burner
Oven BAKE burner spark electrode, gas oven with Direct Spark Ignition (DSI)
Stove top spark electrode for burner.
Stove top burner spark electrode. Has a male spade for wire connection.
Spark electrode set
Spark electrode for surface burner
Burner spark electrode
Glow bar igniter with wire harness
Oven BROIL burner spark electrode, gas oven with Direct Spark Ignition (DSI)
Spark igniter electrode assembly, 35 inch wire lead