Replacement ice maker. Comes with new bail arm, fill cup and harness
Ice maker kit that includes two wire harnesses. The ice maker itself will have part number WPW10300024 on it when you receive it. That is the correct ice maker that comes inside this kit. Must install new harness at same time for it to work.
Refrigerator icemaker. This item does not include a new shut off arm. To remove the existing shut off arm from the old icemaker, lift it to the up position, unhook it from the fill cup bearing, and pull it out of the module.
Refrigerator icemaker assembly, modular style. The new icemaker does not include a new cover, ice level arm, or wire harness, these components will need to be reused from original icemaker.
Refrigerator add-on icemaker kit with 4 wire harness and connector for freezer. This kit includes the icemaker, ice bin, inlet valve, fill tube, and hardware. *For 4 wire 8 terminal IM see Recommended Parts.
Ice container, no auger parts
Refrigerator replacement icemaker. Does not include front cover or shut-off arm, use these parts from old icemaker. Makes 8 radius ice cubes. If the mold where cubes are made is flaking or corroded it is time for a new ice maker assembly. *Use model number to find correct icemaker.
Refrigerator Icemaker assembly. This icemaker fits models that have the icebucket in the door. The bottom mounting bracket on the old icemaker must be reused.
Flex tray ice maker
Ice dispensing bucket
In-Door Ice system ice maker assembly
Ice maker shut off arm
Refrigerator icemaker control module and motor assembly. Located under the white cover of icemaker and controls ice ejector bar, heater and water inlet valve for the icemaker. If the icemaker is not making ice or making too much ice the model may be defective.
Ice maker. In-Door Ice 5 ice cube unit. *Be aware that you will have to reuse the original cover and bracket to install the new ice maker.