Dryer door switch assembly. If the dryer does not start then the door switch could be defective. This switch also replaces the two wire switch.
Surface element control switch (also called the infinite switch) for 8 inch element. The surface element switch sends voltage to the surface element coil. If the switch is defective, the surface element will not work.
Direct drive washer lid switch assembly, If the washing machine does not spin the lid switch may have failed.
Door switch, three terminal. 16amp 125/250volt ac
Light/Fan switch, 3 terminal
Microwave door switch, normally open two terminals. Rated for 16 amps at 125 or 250 vac
Microwave door switch. This switch is normally open. When the microwave door is shut, the door switches close to send power to the microwave. If this switch fails, the microwave will not start.
Dryer push to start switch. If the dryer doesn't start then the start switch may be defective. The switch can be tested to determine it is bad using a multi-meter. **If part needed has a square top rather than triangle, please see related item 1454538
Door switch, two terminal normally closed
Limit switch, manual reset
Contactor, 2 pole, 25 amp, 24 vac
Rollout Limit Switch, 300 degrees F, Manual Reset, SPST
Pressure switch -.6" WC SPST 1/4" barb connection
Primary auto limit switch