Lower Spray Arm
Surface element control switch for the large surface element. If the surface element is not heating the element can be tested to determine if it is defective. If not, the switch is likely causing the problem.
Lower crisper drawer, clear
Dryer heating element and rear housing assembly. Before checking the heating element, first make sure that the thermal fuse is not defective. Normally, a heating element will have a break in the coil if defective.
Ice maker assembly with cover and wire harness. Makes 8 radius ice cubes. If the mold where cubes are made is flaking or corroded it is time for a new ice maker assembly. *Use model number to find correct icemaker.
PureSource 3 water filter fits specific side-by-side models after 2009 where the filter is located in the back, right top. Reduces contaminants including lead, chlorine and mercury. Replace every 6 months for optimal performance.
Refrigerator ice maker kit. If the icemaker is not working make sure the freezer temperature is around zero degrees Fahrenheit. If so, the icemaker or water valve could be defective.
Furnace flame sensor with wire harness
Door strike/catch for front-loading washing machine. The washer door must be latched shut in order for the washer to start. If the door strike is damaged or defective, the washer door won't latch, and the washer will not be able to start.
Oven igniter with long wire harness. The igniter draws electrical current through the oven safety valve to open it. If the igniter glows for more than 90 seconds without igniting the gas flame, this indicates that the igniter is too weak to open the valve.
Dryer door catch kit. If the dryer does not latch properly then either the strike or catch is likely damaged and will need to be replaced.
Dishwasher splash shield kit for the tub corners. Its also a good idea to inspect and replace the lower door deflector if needed
Dishwasher door latch assembly
Oven igniter with wire harness
Water Filter Base