Surface element control switch for the large surface element. If the surface element is not heating the element can be tested to determine if it is defective. If not, the switch is likely causing the problem.
Microwave door switch. This switch is normally open. When the microwave door is shut, the door switches close to send power to the microwave. If this switch fails, the microwave will not start.
Door switch, top and bottom
Pressure switch. NO, 1.74C
Surface element control switch for the small surface element
Contactor 1 pole, 25fla, 24v
Limit Switch - re-settable
Range/stove surface element control switch repair kit. Compatible with a variety of models. The surface element switch sends voltage to the surface element coil. If the surface element is not heating, first test the surface element. If the element is not defective, the switch is likely at fault.
Fan switch, F115 - 30F
Two pole switch, 190F
Surface element control switch, 6 inch element
Limit switch, manual reset, 160 degrees F