Lawn mower rear wheel assembly with drive gear.
Honda air cleaner (or air filter). If the air filter is clogged or dirty, the engine may not start or may run rough.
Front wheel assembly
Honda lawn mower snap retaining ring.
Lawn mower pinion gear. 12 tooth. Engages the drive wheel, also center cam allows the mower to be pulled backwards
Small engine NGK spark plug (BPR6ES). If the engine does not start, the spark plug may be defective. The spark plug should be replaced periodically during regular maintenance.
Element, air cleaner
Lawn mower ratchet key. The ratchet key engages the drive shaft to the drive gear to turn the wheel. A small spring keeps tention on the key. If the key is not engaging the gear it may be worn and will need to be replaced. It is a good idea to also check the spring and replace it if necessary.
Lawn mower ratchet return spring. Helps allow drive wheel to move backwards when forward drive is not engaged
NGK spark plug. The spark plug ignites the fuel and air mixture in the cylinder to power the engine. If the spark plug is burnt, fouled or damaged the engine may not start or may run rough.
Honda recoil starter assembly. The recoil starter engages the drive cup on the flywheel to start the engine. If the recoil starter is defective, the engine may not start.
Wheel drive belt
Carburetor gasket. If this gasket is torn or damaged, the engine may run rough. Be sure to clean the surfaces around the carburetor gasket before installing it.
Walbro primer bulb. The primer bulb draws additional fuel into the carburetor to make the engine easier to start. If the primer bulb is leaking, replace it.
Lawn mower air cleaner cover. If this cover is cracked, or if one of its holding tabs is broken, replace it.