Champion spark plug (RCJ6Y). The spark plug ignites the fuel and air mixture in the engine's cylinder to power the engine. If the spark plug is has fouled (if the tip of the spark plug is burnt or damaged), the engine may not start or may run rough.
Small engine primer bulb. The primer bulb draws additional fuel into the carburetor to help start the engine.
Pressure washer thermal release valve. This valve will open to prevent excessive heat and pressure buildup in the pump.
Chemical injection kit for pressure washer pump. Be sure to use the lowest pressure nozzle when adding chemicals to the spray.
Air filter. If the air filter is clogged or dirty, the engine may not start or may run rough.
Pressure washer pump assembly. If the pressure washer is leaking water, the pump may need to be rebuilt or replaced. This pump does not include a new thermal release valve and key. You will need to reuse the old thermal release valve and drive key or purchase new ones.
Pressure washer high pressure hose, 25 ft. This hose can be used on pumps that produce up to 3000 PSI.
Briggs & Stratton Pressure Washer Pump Saver. 4 oz.
In-line fuel filter
Fuel filter assy 2mm id