Carrier Motor Parts

Draft inducer fan motor

OEM Part - Manufacturer #HC21ZS122

Furnace draft inducer motor with cooling fan. Be aware that the screw holes are not threaded—you will need to use self-tapping screws to install the motor.

OEM Part - Manufacturer #318984-753

To prevent carbon monoxide from leaking into your home, we recommend replacing the draft inducer gasket when servicing the motor or inducer fan. If you do not have a gasket, you can use high-temperature silicone sealant to seal the furnace.

Inducer motor assembly. This assembly is designed for 40, 60, 80, and 100 thousand BTU model furnaces. Your furnace's BTU rating may be listed on the model number tag. You can also determine the rating from your model number—the 3-digit number preceding the hyphen indicates the BTU rating.

OEM Part - Manufacturer #320725-756

Draft inducer motor

OEM Part - Manufacturer #HC21ZS123

Blower motor, 1/4 HP, 1075 RPM, 1 speed

OEM Part - Manufacturer #901874

Condenser fan motor. This single-phase motor has the following specifications:

Horsepower: 1/4
Voltage: 208-230
Full-Load Amperage: 1.4
Hertz: 60
RPM: 1100
Speeds: 1
Rotation: Counterclockwise
Frame: 48
Enclosure: Closed

OEM Part - Manufacturer #HC39GE237

Draft inducer fan motor, 115v 3000rpm

OEM Part - Manufacturer #HC21ZE121

To prevent carbon monoixde from leaking into your home we recommend replacing the draft inducer gasket when servicing the motor or inducer blower wheel. If you do not have a new gasket or it does not come with the replacmeent part you can use high temperature silicone sealant to prevent exhuast from leaking into your home .

Condenser fan motor. This single-phase motor has the following specifications:

Horsepower: 1/10
Voltage: 208-230
Full-Load Amperage: 0.75
Hertz: 60
RPM: 1075
Rotation: Clockwise
Frame: 48
Enclosure: Closed
Shaft Length: 1.75”

OEM Part - Manufacturer #HC33GE233

Inducer motor

OEM Part - Manufacturer #HC21ZE118

To prevent carbon monoixde from leaking into your home we recommend replacing the draft inducer gasket when servicing the motor or inducer blower wheel. If you do not have a new gasket or it does not come with the replacmeent part you can use high temperature silicone sealant to prevent exhuast from leaking into your home .

Furnace blower motor. This single-phase motor has the following specifications:

Horsepower: 1/3
Voltage: 115
Full-Load Amperage: 5.2
Hertz: 60
RPM: 1075
Speeds: 4
Rotation: Counterclockwise
Frame: 48
Enclosure: Open
Shaft Length: 3.9”

OEM Part - Manufacturer #HC41AE117

1/10HP 208-230Volts 60Hertz 0.75Amps 1100RPM Single Speed Closed Enclosure Single Phase CW Rotation 1.5" Shaft

OEM Part - Manufacturer #HC34GE239

Furnace main blower fan motor. 115 volt 1 phase 1/2 hp 1075 rpm 3 speed

OEM Part - Manufacturer #HB43TR113

Carrier furnace inducer motor kit. The draft inducer motor draws air into the burner and exhausts it out the flue. If the draft inducer motor is defective, the furnace may not heat.

OEM Part - Manufacturer #326628-762