Dual Capacitor, 45+ 5 MFD, 440 volts
Flame rollout limit switch, re-settable. opens at 250f
Replacement evaporator pad - 10x13x1-1/2"
Furnace draft inducer mounting grommet. This grommet helps isolate the blower assembly from the furnace to reduce noise.
Furnace draft inducer motor cooling fan blade and clip. You may have to cut the old clip off to remove the fan blade.
Nitride Hot Surface Furnace Ignitor
Flame rollout limit switch re-settable 350F
Contactor. 1 pole, 24 volts, 30 amps.
Gas burner tube
Dual run capacitor round 440 V 35/5 uF
Furnace draft inducer motor with cooling fan. Be aware that the screw holes are not threaded—you will need to use self-tapping screws to install the motor.
Limit switch non-resettable 101-200F
Inducer fan wheel