Oven igniter assembly. Short ceramic style igniter with mounting bracket and wire nuts for installation. Amperage range is 3.3 to 3.6. *Connector may need to be cut off and wires spliced to range wiring with porcelain wire nuts.
Oven bake or broil igniter, 2.5 to 3.0 Amp. The igniter draws electrical current through the oven safety valve to open it. If the igniter glows for more than 90 seconds without igniting the gas flame, this indicates that the igniter is too weak to open the valve. (NOTE: This part is very fragile.)
Stove top burner spark electrode. If the gas burner fails to light, inspect the spark electrode for cracks. If the spark electrode is cracked or damaged, the surface burner won't work properly.
Oven igniter. This is the most common cause of an oven not heating. The igniter draws electrical current through the oven safety valve to open it. If the igniter glows for more than 90 seconds without igniting the gas flame, this indicates that the igniter is too weak to open the valve.
Gas dryer igniter with bracket and wire harness. This is a round spiral-style igniter. The igniter uses heat to ignite the gas in the burner assembly. If the igniter is defective, the gas will not ignite and the dryer will not heat.
Gas dryer igniter assembly with bracket and wire harness. If the dryer does not heat then the igniter may have burned out. The burned spot is normally visible. Be aware the igniter is very fragile.
Bake burner and igniter kit. *Connector may need to be cut off and wires spliced to range wiring with porcelain wire nuts. (Wire nuts not included.)
Gas dryer igniter, round style. The igniter uses heat to ignite the gas in the burner assembly. If the igniter is defective, the dryer will not heat.
Looking for GE Igniter Parts parts? RepairClinic.com has the appliance parts, lawn equipment parts and heating/cooling parts you need!