Hot surface furnace igniter kit.
If the electrical connnector on your old part is different than the new igniter, it can be cut off and spliced onto the new igniter wires using the provided wire nuts.
Universal Integrated Ignition Module
Replacement control board for Goodman/Amana part number PCBBF112S.
Replacement control board for Goodman and Amana part number PCBBF132S.
Universal Gas Valve, HSI/DSI Single Stage, Slow Opening, Inlet / Outlet Pressure Taps, Plastic Hose Barb (For Connection To ¼ Hose/Flexible Tubing), LP Gas Conversion Kit, Inlet/Outlet Reducer Bushings (1/2 NPT X 3/8 NPT) 100KBTU/Hr (Nat Gas), 24V, 60 Hz, 1/2 X 1/2 NPT, Replaces 36G24-214
Hot Surface Ignitor With 5-1/4" Leads, N Style Mounting Block, Left Tab, Insulation 200°C, Electrical Connection, Molex Side Lock Connector with .092” Male Pins, Replaces R/S 41-408
Universal Nitride igniter upgrade kit
Hot Surface Ignitor with 5-1/4" Leads, NM Style Mounting Block, right tab, Insulation 200°C, Connector with Brackets, Includes Ceramic Wire Nuts. Replaces R/S 41-414
Universal hot surface ignition control
Universal Gas Valve - *The Manufacture recommends that this part be installed by a licensed contractor.
Hot Surface Ignitor With 5-1/2" Leads, A Style Mounting Block, Sealed Combustion, Insulation 200°C, Electrical Connection, Molex Internal Keyed Connector with .093" Male Pins, Includes Gasket, Replaces R/S 41-401
Silicon Nitride 80V Hot Surface Ignitor, With White Teflon Coated Leads, Terminal Amp Receptacle With .084" Female Socket, Must Be Used With Hot Surface Ignition for Residential Furnaces (Silicon Nitride Replacement Only) Replaces Lennox 768A-4 (41K5601 & LB-109261A)
Hot Surface Ignitor Mini With 7.5" (+/- 1") Leads Including Electrical Connector. Replaces R/S 41-603
Silicon Nitride 80V Hot Surface Ignitor, With White Teflon Coated Leads, 2 Terminal Amp Receptacle With .093 Female Socket, Must Be Used With Hot Surface Ignition for Residential Furnaces (Silicon Nitride Replacement Only) Replaces Amana 768A-2 (Amana/Goodman 11111701)
Furnace control board kit. This single stage control board is designed to replace Lennox part number 83M00 and Y7761. The control board regulates the supply of power to the furnace components. Be sure to test more commonly defective parts before replacing the control board.