Dryer door switch assembly. If the dryer does not start then the door switch could be defective. This switch also replaces the two wire switch.
Washing machine lid switch assembly with wire harness. The lid switch ensures that the washer door is closed while the washer is spinning. If the lid switch is broken, the washer will not spin. If the washer won't spin but will still agitate, the lid switch is likely defective.
Surface element control switch (also called the infinite switch) for 8 inch element. The surface element switch sends voltage to the surface element coil. If the switch is defective, the surface element will not work.
Direct drive washer lid switch assembly, If the washing machine does not spin the lid switch may have failed.
Door switch, three terminal. 16amp 125/250volt ac
Light/Fan switch, 3 terminal
Dryer push to start switch. If the dryer doesn't start then the start switch may be defective. The switch can be tested to determine it is bad using a multi-meter. **If part needed has a square top rather than triangle, please see related item 1454538
Microwave door switch. This switch is normally open. When the microwave door is shut, the door switches close to send power to the microwave. If this switch fails, the microwave will not start.
Door switch, two terminal normally closed
Push to start switch
Water level pressure switch
Three terminal door switch kit. Be aware that this switch replaces older 2 terminal switches.
Dryer door/washer lid switch kit. Comes with dryer mounting bracket, (2) wire terminals and (2) mounting screws.
Door switch, two terminal normally open