Refrigerator door shelf retainer bar.
Lower Spray Arm
Chrome drip bowl for 6-inch electric coil burner. This drip bowl sits underneath the burner to catch drips or spills.
Dishwasher bottom door gasket and deflector strip. If the dishwasher is leaking the gasket may be damaged.
Chrome drip bowl (also called a drip pan) for 8-inch burner. The drip pan sits underneath the heating element to collect drips or spills around the burner.
Oven bake element. The terminals are male quarter inch spade connectors. The wires push onto the heating elements connectors. If the oven does not bake then the element could have burned out.
Dishwasher door gasket (or door seal). This door gasket creates a seal around the dishwasher to prevent water from leaking out. If the gasket is torn, the dishwasher will leak water.
Oven igniter assembly. Short ceramic style igniter with mounting bracket and wire nuts for installation. Overall length is 3.72", amperage range 3.2 to 3.6. The igniter is the most commonly defective part for a gas oven not heating correctly or at all.
Lower crisper drawer, clear
Lower Spray Arm with Heat Shield. Center tower extendes up thru lower rack with water pressure. If replacing older style spray arm, related item# 4922150 support is needed.
Dryer drum belt, length 88.75" x width 1/4". If the drum does not turn, but you can hear the motor running then there is a good chance the belt has broken.
Refrigerator meat pan hanger track for the right side. Approximately 16 3/4" long for the left side see related parts.
Ice maker assembly with cover and wire harness. Makes 8 radius ice cubes. If the mold where cubes are made is flaking or corroded it is time for a new ice maker assembly. *Use model number to find correct icemaker.
Appliance light bulb, clear 120 Volt 40 Watt Regular Base
Dryer rear drum bearing kit. The holes in the metal plate are not threaded. Use the self tapping screws in the kit to thread the plate. If the dryer is noisy then the rear bearing could be worn and require replacement.