Secondary microwave door switch.
Chrome drip bowl (pan) for 8-inch burner on electric range. This drip bowl sits underneath the heating element to catch drips or spills.
Lid switch and wire harness assembly. The lid switch assembly prevents the washer from spinning if the lid is open. If the washer won't spin, but will agitate, the lid switch might be defective.
Control switch for 2,600 Watt surface element. The surface element switch sends voltage to the surface element coil. If the switch is defective, the surface element will not work.
Refrigerator solenoid assembly for dispenser door. If the dispenser door does not close properly frost will start to form in the dispenser area.
End cap, oven door handle, black. Be aware that not all range handle endcaps require locating pins. If your model does not have locating pins, you may discard them.
Dishwasher water inlet valve. The water inlet valve supplies water to the dishwasher. If the water inlet valve is defective, the dishwasher may not fill or may underfill.
High limit thermostat for refrigerator or freezer defrost heater, L140-30F. This thermostat is normally closed for continuity at room temperature. If the high limit thermostat is open at room...
Dryer rotary start switch. If the start switch is defective, the dryer won't start. To determine if the start switch is defective, use a multimeter to test it for continuity.
Refrigerator ice dispenser damper door. The crank is no longer sold with the damper door. You will have to reuse the old crank. If this door does not close properly, frost will build up around the...