Oven bake heating element. Push-on wire terminals. Includes feet for sitting on bottom of oven floor, and mounting plate for attaching to back wall of oven. Often, if the heating element has burned out, it will be visibly damaged. Inspect the heating element for holes or blisters.
Refrigerator glass tube defrost heater and bracket assembly.
Oven bake heating element with screw-on terminals. The element is 18-1/4 inches wide, 14-1/2 inches deep to mounting flange. Terminal ends extend 2-1/2 inches past flange. 2,300 watts at 220 volts. If the oven does not heat the bake element may have burned out.
Oven bake element. The terminals are male quarter inch spade connectors. The wires push onto the heating elements connectors. If the oven does not bake then the element could have burned out.
Oven bake element. 240 Volt 3100 Watt element with screw style connections. If the oven does not bake then the element could have burned out.
Surface heating element
Oven bake heating element. Push-on wire terminals. If the oven won't heat, the bake element may have burned out. Often, if the bake element has burned out, it will be visibly damaged. Inspect the bake element for holes or blisters.
Stove top coil surface heating element, 8 inch. If the element does not heat either it or the control switch is defective. The coil can be tested to determine if it is at fault.
Radiant dual surface element 9 inch
Oven broiler heating element
Refrigerator defrost heater kit. This dual heater kit replaces single style heaters. If the refrigerators evaporator coils do not automatically defrost then this heater may be defective.
Refrigerator defrost heater kit with thermostat for side by side models. If the freezer is cold, but the refrigerator is warm you could have a problem with the defrost system. If so, the defrost coils will be iced over and this heater kit may be defective.
Oven bake heating element. If your oven won't heat, the bake element may have burned out. A burned-out bake element is often visibly damaged.
Oven broiler heating element with screw-on terminals
Stove top coil heating element. The element is 8" in diameter. If the surface element won't heat, either the surface element or the surface element switch may be defective. To determine if the surface element is defective, use a multimeter to test it for continuity.