Oven igniter assembly. Short ceramic style igniter with mounting bracket and wire nuts for installation. Amperage range is 3.3 to 3.6. *Connector may need to be cut off and wires spliced to range wiring with porcelain wire nuts.
Light bulb 40 watt 120 volt medium standard base. Used in many refrigerators and ranges.
Oven bake heating element. Push-on wire terminals. Includes feet for sitting on bottom of oven floor, and mounting plate for attaching to back wall of oven. Often, if the heating element has burned out, it will be visibly damaged. Inspect the heating element for holes or blisters.
Evaporator fan motor assembly with wire harness
Burner drip bowl (or drip pan) for 8-inch burner. The drip pan sits underneath the heating element to collect drips or spills around the burner.
Door Shelf Approximately 23" wide x 3" tall x 7 1/2" deep
Burner drip bowl (also called a drip pan) for 6-inch burner. The drip pan sits underneath the heating element to collect drips or spills around the burner.
Stove top heating element terminal block kit (receptacle). If the heating element operates intermittently then this terminal block or the elements terminals are likely corroded and both will likely need to be replaced.
Refrigerator light switch. This switch activates the refrigerator light when the door is open. It also prevents the dispenser from working if the door is open.
Refrigerator crisper drawer cover. Measures approximately 25" x 19 1/2"
Evaporator fan blade. This blade is located in the freezer compartment of the refrigerator.
Grommet evap fan
Refrigerator door gasket. If the gasket is defective, cold air will leak out of the refrigerator. As a result, the fridge may run longer than normal, or frost may accumulate inside of the fridge.
Freezer Door Shelf Bar
Refrigerator run capacitor 12 uF. If this run capacitor is defective, the refrigerator will not run.