Shop replacement repair parts for Carrier Furnace model 58SSB130-131BC

Single run capacitor 440V 7.5 mfd

Gas burner tube

Furnace draft inducer motor with cooling fan. Be aware that the screw holes are not threaded—you will need to use self-tapping screws to install the motor.

Furnace draft inducer motor cooling fan blade and clip. You may have to cut the old clip off to remove the fan blade.

Blower wheel for draft inducer motor 4" Diameter 1.5" Width

Transformer, 120V-24V 40VA

Clip

High limit thermostat, 180 degrees Fahrenheit

Furnace blower motor, 1/2HP 115V 1075RPM

High efficiency furnace control board. The control board regulates the supply of power to the furnace components. Be sure to check more commonly defective parts before replacing the control board.

Fuse

Blower wheel - 10-5/8"x 6" cw 1/2" bore

.43 MM orifice, pack of 7. *Should be installed by a certified Carrier repairperson.

Fuse Link Kit

Pressure switch