Shop replacement repair parts for GE Dryer model PFDS455GL2MV

Dryer drum slide, pack of two

Dryer bearing slide 2-pack

Rear drum bearing sleeve

Dryer idler pulley wheel. If the pulley wheel is worn down, it may cause the dryer to be excessively noisy.

Light bulb, 120V, 10W

Gas dryer igniter assembly with bracket and wire harness. If the dryer does not heat then the igniter may have burned out. The burned spot is normally visible. Be aware the igniter is very fragile.

Door switch

High-limit thermostat for dryer. L315-65. If the dryer overheats, this high-limit thermostat will cut off the power to the drive motor. If the high-limit thermostat has blown, the dryer won't start.

Inlet control thermistor. Resistence reading should be around 100K ohms at room temperature and decrease with temperature rise.

Drum support shaft and bearing assembly

Thermostat, high limit

Screw #10

O-Ring for retaining drum bearing sleeve on shaft

Door strike

Dryer door catch kit