Shop replacement repair parts for Carrier Furnace model 383KAV060110AAJA

Furnace flame sensor. The flame sensor monitors the burner to detect whether or not a flame is present. If the flame sensor is defective, the furnace may not heat.

Gas burner tube

Furnace draft inducer mounting grommet. This grommet helps isolate the blower assembly from the furnace to reduce noise.

Furnace draft inducer motor with cooling fan. Be aware that the screw holes are not threaded—you will need to use self-tapping screws to install the motor.

Furnace draft inducer motor cooling fan blade and clip. You may have to cut the old clip off to remove the fan blade.

Limit switch

Transformer, 120V-24V 40VA

Gasket kit for draft inducer motor

Clip

Igniter replacement kit

Brand decal

Pressure switch

Furnace control board. The control board regulates the supply of power to the furnace components. Be sure to check more commonly defective parts before replacing the control board.

12" x 10" blower wheel, 1/2" bore, CW.

Manual reset switch, opens at 350 degrees F