Price Match GuaranteeLennox Furnace G40DF-36B-090-10 Parts
Shop replacement repair parts for Lennox Furnace model G40DF-36B-090-10
Furnace flame sensor. The flame sensor monitors the burner to detect whether or not a flame is present. If the flame sensor is defective, the furnace may not heat.
Run Capacitor. Single, Oval, 370 volt, 5 Microfarad.
Furnace blower motor. This single-phase motor has the following specifications:
Horsepower: 1/3
Voltage: 115
Full-Load Amperage: 5.1
Hertz: 60
RPM: 1075
Speeds: 4
Rotation: Counterclockwise
Frame: 48
Enclosure: Open
Shaft Length: 4.25”
Furnace igniter assembly
Switch-interlock
Wheel-blower 10" x 8" 1/2"bore
Main Gas Burner Assembly Four Tube
Furnace draft inducer motor.115Volts 60Hz 1.2 amp 3000 RPM's Closed Enclosure. The draft inducer motor draws air into the burner and exhausts it out the flue. If the draft inducer motor is defective, the furnace may not heat.
Gasket
Pressure switch
Limit control, rollout, 210f
Limit control, 135 f
Gas valve conversion kit, natural to LP. *Should be installed by a certified Carrier repairperson.
Pressure switch tubing kit
Gasket
Frequently Purchased Together For This Model
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic