Shop replacement repair parts for Trane Furnace model AUD120C954H4

Furnace flame sensor. The flame sensor monitors the burner to detect whether or not a flame is present. If the flame sensor is defective, the furnace may not heat.

Run Capacitor, 10 uf, 440 VAC

Hot surface furnace ignitor with plug on connector

Gas Valve Assembly
Please see related items for gas valve adapter kit

Transformer; 115v pri, 24v sec., 60hz, 35va, foot mount

Draft Inducer Motor, 1 stage. The draft inducer motor draws air into the burner and exhausts it out the flue. If the draft inducer motor is defective, the furnace may not heat.

Gasket; venter assembly

Door switch, 21 amps, 125/250 vac

Blower Wheel 11.7 by 10.6 inches.

Switch;thermal limit, open at 260, close at 230 deg

Resilient ring, 2 required

Brass orifice spud, drill #45

3/4HP 115Volts 60Hz 12 amp 1075 RPM's 4 Speed Open Enclosure 48Y Frame Single Phase CCW 3" Shaft

Motor mounting bracket

Wire;12 pin wire harness assembly