Price Match GuaranteeTrane Furnace TDD040R924B1 Parts
Shop replacement repair parts for Trane Furnace model TDD040R924B1
Furnace flame sensor. The flame sensor monitors the burner to detect whether or not a flame is present. If the flame sensor is defective, the furnace may not heat.
Stainless steel burner
Transformer; 115v pri, 24v sec., 60hz, 35va, foot mount
Capacitor; run, 7.5 mfd, 440v oval, w/o resistor
Control; fuse link, open at 333 deg f
Gasket; venter assembly
Resilient ring, 2 required
Hot Surface Ignitor with 11" leads, Y Style Mounting Block, Oblong Base, Insulation 200°C, Stripped Ends, Includes Ceramic Wire Nuts, Includes Gasket. Replaces R/S 41-406
Thermal limit switch, opens at 200 degrees and closes at 170 degrees
Brass orifice spud, drill #45
Furnace draft inducer motor. The draft inducer motor draws air into the burner and exhausts it out the flue. If the draft inducer motor is defective, the furnace may not heat.
Blower motor, 1/5 HP, 115 volts, 1080 RPM's, 4 speed, 60 herta, 1 phase, counterclockwise rotation
Flue transition adaptor
Wheel; fan, steel, 10.62 dia x 6 width, 1/2 in bore
Frequently Purchased Together For This Model
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic