Shop replacement repair parts for York Furnace model P2MPD20N08001F

Furnace control board. The control board regulates the supply of power to the furnace components.

Gas Burner Tube

Furnace flame sensor. The flame sensor monitors the burner to detect whether or not a flame is present. If the flame sensor is defective, the furnace may not heat.

Run capacitor, single,10mfd,370 volts, oval

2.8 oz Tube of Red Devil High Temp RTV Silicone. Perfect for Gasket replacement. Not for Heat Exchangers.

Blower wheel, 11 x 10, cw, 1/2 bore

Orifice,burner drill size 45

3/4HP 115Volts 60Hz 11 amp 1060 RPM's 3 Speed Open Enclosure 48Y Frame Single Phase CCW 3.5" Shaft

Universal Gas Valve, HSI/DSI Single Stage, Slow Opening, Inlet / Outlet Pressure Taps, Plastic Hose Barb (For Connection To ¼ Hose/Flexible Tubing), LP Gas Conversion Kit, Inlet/Outlet Reducer Bushings (1/2 NPT X 3/8 NPT) 100KBTU/Hr (Nat Gas), 24V, 60 Hz, 1/2 X 1/2 NPT, Replaces 36G24-214

Flame rollout limit switch 185 degrees F open, manual reset

Transformer, 120 volt primary 24 volt secondary 40 va

Limit switch, 370 open, manual re-set

Igniter kit with bracket, screw, and adapter

Pressure switch

Auto reset limit control