Shop replacement repair parts for Goodman Packaged Unit/RTU model GPG13240701BA

Furnace flame sensor. The flame sensor monitors the burner to detect whether or not a flame is present. If the flame sensor is defective, the furnace may not heat.

Beckett burner

Contactor, 2 pole, 30 amp, 24 vac **Special Note** This may replace single pole contactor and require a technican to install (based on model #)

Gas valve, 24v 3.5" wc

Screw, #10 X 1/2, black,

.43 Natural gas burner orifice

300f m/r rollout limit switch

Triple-D Coil Cleaner is a 19oz Aerosol spray can, that is safe for homeowner use. One can will clean an entire outdoor condenser coil and/or indoor evaporator coil, to remove energy-stealing dirt, debris and soot.

Dual run capacitor 440V 30/5 MFD

Nut, acorn 5/16 hex black

Furnace draft inducer motor. The draft inducer motor draws air into the burner and exhausts it out the flue. If the draft inducer motor is defective, the furnace may not heat.

Pressure switch,(-)0.33pr

Pressure switch hose 3/16" I.D.

Screw-tc h

Ignition control board. The ignition control board regulates the supply of power to the furnace components. Be sure to check more commonly defective parts before replacing the control board.