Shop replacement repair parts for LG Dryer model 90441

Thermostat and thermistor kit. The thermostat has reset button in center that will trip due to poor air flow such as a clogged exhaust vent.

Dryer moisture sensor bar. If the dryer timer does not advance properly inspect the moisture sensor bars for damage which can cause the automatic drying cycle to not work properly.

Dryer idler pulley and spring kit for drum drive belt

Gas dryer igniter with bracket and wire harness. This is a round spiral-style igniter. The igniter uses heat to ignite the gas in the burner assembly. If the igniter is defective, the gas will not ignite and the dryer will not heat.

LP conversion kit *Note: Sticker indicating the gas type is not included.

Felt seal, dryer drum

Dryer gas burner valve assembly. Two solenoids. When installing the new valve, transfer the orifice from the old valve to the new valve.

Idler pulley wheel with bearing

Blower wheel

Gas dryer flame sensor

Dryer drum drive motor with pulley. If the dryer does not start the motor could be bad. Before replacing the motor the door switch and thermal fuse should be tested to determine if they are defective.

Drum baffle

Drying rack assembly

Door Strike

Dryer door seal