Shop replacement repair parts for Briggs & Stratton Small Engine model 44N677-0006-G1

Briggs and Strartton in-line fuel filter with 40 micron rating and 1/4" inlet & outlet. If the engine does not start then the fuel filter may be clogged and not allowing enough fuel to enter the carburetor.

Briggs & Stratton Original Equipment 492932S Oil Filter. Length: 2 1/4 inches. For optimum performance, we recommend changing the oil in your small engine after the first five hours of use. After that, change the oil on a yearly basis or after every 50 hours of use (whichever comes first).

Crankcase oil seal, PTO side

Replacement Briggs & Stratton fuel line kit with clamps. 1/4 Inch inside diameter, Cut to length.

Push rod for intake valve.

Briggs & Stratton flywheel key. The flywheel key aligns the flywheel in the correct position on the crankshaft. If the engine stops suddenly due to hitting a hard object, the flywheel key shears in half to prevent damage to the engine. If the flywheel key is broken, the engine won't start.

Briggs & Stratton exhaust push rod, steel.

Briggs & Stratton rocker cover gasket. Be certain that all surfaces are clean and dry before installing this gasket.

Spark plug wrench designed to fit Briggs & Stratton Over Head Valve engines. Combination 13/16" on one end and 5/8" on the other.

Filter, a/c cartridge

Ignition coil

Gasket-crankcase kit

Oil seal, magneto side

Gasket-float bowl

Hose-vacuum