Shop replacement repair parts for Universal Dryer model MDE216RBD1

Dryer drum belt, length 88.75" x width 1/4". If the drum does not turn, but you can hear the motor running then there is a good chance the belt has broken.

Dryer rear drum bearing kit. The holes in the metal plate are not threaded. Use the self tapping screws in the kit to thread the plate. If the dryer is noisy then the rear bearing could be worn and require replacement.

Dryer thermal limiter (or thermal fuse). May be located on the blower housing or element. If the dryer overheats, the thermal fuse blows to cut off power to the dryer. If the thermal fuse has blown, the dryer won't start. The thermal fuse cannot be reset--if the fuse has blown, it must be replaced

Dryer heating element and housing assembly. If the dryer does not heat check for a blown themal fuse or thermal cut out. Heating elements will often have a break in the coil element if defective.

Bearing cup for drum support ball

Idler pulley assembly for dryer drum belt

Door strike

High temp adhesive

Air duct seal

Main terminal block for power cord

Heating element coil

Clip,top-to-front

Screw, pan head, 8-18b x 0.31

Condenser coil cleaning brush

Door catch kit