Shop replacement repair parts for GE Dryer model DDG7287SBLWW

Dryer idler pulley wheel. If the pulley wheel is worn down, it may cause the dryer to be excessively noisy.

The GE Appliances Drum Bearing Kit WE25M40 is a high quality, Genuine OEM part that supports the rear of the dryer drum, ensuring smooth and quiet rotation. It is important to disconnect all utilities before installation.

Gas dryer igniter assembly with bracket and wire harness. If the dryer does not heat then the igniter may have burned out. The burned spot is normally visible. Be aware the igniter is very fragile.

Dryer drive belt. This is the most common GE/Hotpoint dryer belt. 87" long and 1/4" wide. 4 ridges.The drive belt dries out over time. If the dryer belt cracks or breaks, the dryer drum will not be able to turn. If the dryer motor is running, but the drum won't rotate, the belt has likely broken.

Control knob, white

Door handle, white. Snaps in place

Dryer gas valve solenoid coil. Has two terminals.

Gas valve solenoid coil 3 terminal

Dryer motor kit. Replaces old "T" & "V" style motors. Includes 2 motor pulleys and basic directions. Common symptoms of a bad drive motor are:
-Dryer stops turning during cycle
-Dryer won't start
-Dryer won't turn at al

Door strike

Dryer door catch kit

The GE Appliances Drum Front Slide Bearing WE3X87 is a high quality replacement part that allows the drum to rotate smoothly on the felt seal of the front panel. It is recommended to replace all bearings at once and to disconnect the appliance from utilities before installation.

The GE Appliances Blower Wheel WE16M15 is a high-quality replacement part that attaches to the drive motor shaft and blows air through the drum and out through the exhaust vent. It replaces multiple part numbers. When repairing use caution.

Flame sensor at side of burner tube

The GE Appliances Lint Filter WE18X54 traps lint and debris from dryer exhaust air