Price Match GuaranteeWhirlpool Dryer LE6880XTM0 Parts
Shop replacement repair parts for Whirlpool Dryer model LE6880XTM0
Dryer drum drive belt. This belt is approximately 1/4" wide x 92-1/4" long. It is flat on one side and has 4 ribs and 3 grooves on the other. It replaces many other belts, including some with 5 ribs and 4 grooves. The belt attaches to the motor pulley and spins the drum as the motor rotates
Dryer thermal fuse. Opens at approximately 196°F (91°C). *If open check for air flow issues like plugged exhaust vent or damaged blower wheel
The drum support roller kit, 349241T. If the dryer is making a rumbling or knocking noise the rollers may be worn out causing the drum not to turn smoothly.
Dryer drum drive motor with pulley
Idler pulley for dryer drum drive belt
Dryer blower wheel. Used on 29 inch Whirlpool built models with lint filter on top. To remove the blower wheel, unscrew the blower wheel clockwise off the motor shaft.
Plastic leveling leg. White approximately 1" round x 1 3/4" long
Dryer door catch kit
Dryer tri-ring retainer for drum support rollers.
Dryer heating element wire connector kit. Wire with spade terminal & wire nut
This is a genuine replacement part. Whirlpool 349639 Lint Screen.
Motor pulley, 60 hertz
Heating element thermal cut-off (thermal fuse) 360 degrees and high-limit thermostat 250 degrees. The thermal fuse is a safety device designed to protect the dryer from overheating. A multimeter can be used to test the fuse. Always check the dryer venting when replacing a blown thermal fuse.
White Touch Up Paint
Lint screen housing foam seal
Frequently Purchased Together For This Model
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic