GE Washing Machine WCRD2050FW Parts

Washing machine agitator assembly.

Tub Dampening Strap (set of 2)

Washing machine main tub seal. If the washer leaks around the center shaft then the main tub seal is likely defective.

The Genuine OEM GE Appliances Drive Belt WH1X2026 connects the drive motor to the washer's drive system to spin the basket. It is a high-quality, black, V-shaped belt that measures 29 1/2 inches by 1/2 inch. Disconnecting the appliance from all utilities is recommended before installation.

Washing machine drain pump assembly. The drain pump pushes water through the drain hose during the drain cycle. If the drain pump is clogged, damaged, or defective, the washer won't drain properly.

Washing machine main tub bearing. Located at bottom of outer tub. The tub bearing helps to keep the inner tub spinning smoothly.

Tub bearing washer

Suspension rod assembly (green)

This is a Genuine Replacement Part. General Electric (GENF0) WH16X543 Washing Machine Suspension Rod.

Hose from outer tub to the drain pump

Washing machine agitator drive bell (also called the coupler). The drive bell connects the transmission drive shaft to the agitator base.

The GE OEM WH2X1193 Hub Nut is a durable and reliable part for General Electric washing machines. It is 1 11/16 inches in size and has a backwards thread. A Spanner Wrench is recommended for installation and removal.

Capacitor

Suspension rod support socket

The GE Appliances Water Pressure Switch Hose applies air pressure to the water-level pressure switch. It is made of flexible plastic and should be installed with the appliance disconnected from utilities.