Shop replacement repair parts for GE Refrigerator model TPX24PRYAWW

Universal appliance light bulb, 40A15. 40 WATT 15 AMP standard base

Water line quick connector. Connects two 5/16 lines

This dispenser door flap mounts in the ice dispenser.

Refrigerator run capacitor 12 uF. If this run capacitor is defective, the refrigerator will not run.

Refrigerator icemaker kit, The kit includes the fill cup, 4 pin wire harness adapter, and tube. If the icemaker is not working, make sure the freezer temperature is around zero degrees Fahrenheit. If the refrigerator temperature is correct, the icemaker or water valve could be defective.

Light bulb socket

The GE WR9X489 is an OEM Defrost Timer for Refrigerators that manages the automatic defrost system in the freezer. It replaces several part numbers and it's important to reference the manufacturer or service manual before purchasing a replacement.

The GE Appliances Right Drawer Slide Rail supports the drawer as it slides in and out. It measures L:16 inches x W:2.125 x H:1.375 inches and is recommended to be installed with the appliance disconnected from all utilities.

Dual water inlet valve kit. New, quick connections. Cut retaining nuts off of existing plastic water lines and gently push them into new valve. To remove, depress ring that the tube slides into.

Ice crusher solenoid plunger

The GE WR17X2891 is a plastic tubing for refrigerators that supplies water to components like the ice maker and water dispenser. It has a 5/16 inch diameter

The GE WR72X239 is a left-side Drawer Slide Rail for Refrigerators, replacing part number WR72X0239. It is important to reference the manufacturer or service manual before purchasing a replacement part.

This clip on refrigerator defrost thermostat clips on to your refrigerator's evaporator and will cut out at 60 -Degree Fahrenheit and kick back in when the temperature drops to 32 -Degree Fahrenheit.

Refrigerator compressor kit. This part must be installed by a licensed repair technician.

This defrost heater assembly will keep the cooling coils from frosting over. Additionally, this part will sense when the heat has reached the desired temperature.