Shop replacement repair parts for GE Washing Machine model WJSR2080T3AA

Washing machine agitator assembly.

Tub Dampening Strap (set of 2)

Control knob, white

External hose drain

Washing machine main tub seal. If the washer leaks around the center shaft then the main tub seal is likely defective.

The Genuine OEM GE Appliances Drive Belt WH1X2026 connects the drive motor to the washer's drive system to spin the basket. It is a high-quality, black, V-shaped belt that measures 29 1/2 inches by 1/2 inch. Disconnecting the appliance from all utilities is recommended before installation.

Washing machine drain pump assembly. The drain pump pushes water through the drain hose during the drain cycle. If the drain pump is clogged, damaged, or defective, the washer won't drain properly.

Tub bearing washer

The GE OEM WH2X1193 Hub Nut is a durable and reliable part for General Electric washing machines. It is 1 11/16 inches in size and has a backwards thread. A Spanner Wrench is recommended for installation and removal.

Hose from outer tub to the drain pump

The GE WH1X2754 Timer Knob Assembly is white in color.

Washing machine agitator drive bell (also called the coupler). The drive bell connects the transmission drive shaft to the agitator base.

The GE Appliances Water Inlet Valve controls water flow into the washer and is also known as the Water Inlet Valve Assembly. It is recommended to disconnect the appliance before installation.

The GE Appliances Pressure Switch WH12X10065 detects water level in washers and shuts off the fill valve when it reaches a specified level. It is important to disconnect the appliance from utilities before installation.

The Fabric Softener Dispenser Cup by GE Appliances is a high-quality, genuine OEM part that holds fabric softener until it's dispensed into the water. It's located at the top of the agitator and should be installed with the appliance disconnected from all utilities.