Shop replacement repair parts for KitchenAid Ice Machine model KUIC15NRTS2

Affresh® cleaner for under counter ice machines. Safe for use in the water tank, ice storage bin and on the evaporator. 16oz.

Condenser fan motor kit. The part has been updated by the manufacturer and may not look like the orginal.

Ice scoop

1/4 inch plastic water line kit, approximately 72 inches. Tubing will need to be cut to match existing length.

Silicone rubber adhesive and sealant for felt seals, door gaskets and more. 2 ounces

Screw, 8-18 x 1/2

Screw 1/4" hex head, 10-12 x 1/2

Full bin thermistor

Ice cutting grid

Fine thread hex head screw

Recirculating pump

Drain cap fastener

Ice maker water inlet valve. 1/4" yellow inlet port. The water inlet valve supplies water to the ice machine. If the water inlet valve is defective, the ice maker may not make ice.

Ice cutting grid wire. Includes 8 screws and approximately 10 feet of wire. 2 kits are needed to replace both directions.

Water supply & distribution tube assembly