Shop replacement repair parts for Briggs & Stratton Small Engine model 19E412/1134-E1

Replacement Briggs & Stratton fuel line kit with clamps. 1/4 Inch inside diameter, Cut to length.

Fuel cap

Briggs & Stratton in-line fuel filter. The filter screen is on the large side of the housing. The port on the large side goes to the fuel tank while the port on the small side of the housing goes to the carburetor.

Briggs & Stratton flywheel key. The flywheel key aligns the flywheel in the correct position on the crankshaft. If the engine stops suddenly due to hitting a hard object, the flywheel key shears in half to prevent damage to the engine. If the flywheel key is broken, the engine won't start.

Briggs & Stratton starter gear (also called a pinion gear), 16-tooth, plastic. The starter gear engages the flyhweel to start the engine. If the teeth on the starter gear are worn out, the engine may not start.

Gasket-float bowl

Clamp-hose

Fuel inlet hose connector

Briggs and Stratton small engine electric starter kit.

Recoil Pulley, 5-16 HP

Small engine starter pawl (Nylon). *Sold as a set of Two.

Oil seal, magneto side

Flywheel key pack of three

Oil Fill Plug, Selected Engines w/Angled Oil Fill Neck

Rotary switch