Kenmore Range/Stove/Oven 790.91044402 Parts

Chrome drip bowl (also called a drip pan) for 8-inch top coil element. The drip pan sits underneath the heating element to collect drips or spills around the element

Surface element receptacle with wires, wire nuts, and heat-shrink tubing

Oven temperature sensor *May require cutting and splicing wire connector from old sensor onto new sensor with porcelain wire nuts

Surface element control switch for the small surface element

8 Inch electric coil surface element with looped terminals, 4 turns

Glide,drawer, front

Appliance light bulbs (2 pack).

-40 Watts
*No longer Frosted

Range/stove surface element (6-inch). If the surface element won't heat, either the surface element or the surface element switch may be defective. To determine if the surface element is defective, use a multimeter to test it for continuity.

Drawer glide, rear

Foot Assembly

Oven bake element. If the oven won't heat, the bake element may have burned out. If the bake element has burned out, it will often be visibly damaged. Inspect the bake element for holes or blisters.

Leveling leg

Oven anti-tip bracket kit. This bracket helps to secure the range and prevent it from tipping over.

Chrome drip bowl, 6 inches

Range/stove surface element control switch repair kit. Compatible with a variety of models. The surface element switch sends voltage to the surface element coil. If the surface element is not heating, first test the surface element. If the element is not defective, the switch is likely at fault.