String trimmers can turn a mediocre yard into a well-polished masterpiece. That’s why it’s important to take good care of this important tool.
Here are our best tips on how to keep your string trimmer running well this season and beyond:
First, learn how string trimmers work in our popular how-it-works video:
Here are five ways to maximize efficiency, save money and keep your string trimmer working well:
Remember to first consult your ownerâ€™s manual for maintenance instructions, as they do vary by model.
The easiest way to maximize the efficiency of a string trimmer is to use a tune-up kit thatâ€™s packed with the essentials designed specifically for that model. Enter your string trimmerâ€™s model number here to discover tune-up kits specifically designed for it.
1. Change the air filter.
The air filter has the important job of stopping dirt, dust and debris from getting into the engine. Clean the filter after every four hours of use. Replace it every 100 hours or every three months, whichever comes first.
2. Change the fuel filter.
In most models, fuel filters can be removed and cleaned. Some fuel filters are located in the fuel line and others are located inside of the fuel tank. Be sure to consult your ownerâ€™s manual for information about this. If you find debris clogging the mesh screen inside the filter, replace it.
3. Clean/replace the spark arrestor
Located inside of the string trimmer engineâ€™s muffler, the spark arrestor has an important role in the proper functioning of the string trimmer.
It should be cleaned or replaced every 25 hours of use or once a season.
Note that if your model has a fiberglass spark arrestor, it should be discarded and replaced every 25 hours of use, as this type cannot be cleaned and reused.
4. Replace the cutting line.
Over time, string trimmer line weakens, becomes brittle and easily breakable. Use a high quality, non-rounded string for a dramatically better cut. RepairClinic has replacement string trimmer line for all models.
Related post: How to supercharge your string trimmer
5. At the end of the season, degrease.
Before storing your string trimmer at the end of the season, spray a degreaser on greasy and dirty areas. Let it sit for 10-15 minutes before wiping the sprayed area with a clean cloth. Rinse it off and ensure that itâ€™s completely dry before storing the string trimmer.
Here are simple fixes for a few common string trimmer problems:
Problem: The engine starts and then stops shortly afterward.
Possible fix: The spark arrestor may be clogged. This is often caused by using too much oil or the incorrect type of oil in the fuel mixture. With your string trimmer model, head to RepairClinic.comâ€™s Repair Help for troubleshooting information and to discover what may be the cause and solution.
Problem: The engine wonâ€™t start at all.
Possible fix: If the engine wonâ€™t start at all, the most likely cause is a defective spark plug or a restricted carburetor.
Check out RepairClinicâ€™s Repair Help information, where you can find additional troubleshooting information for common string trimmer problems.
Youâ€™ll find other symptoms and troubleshooting information on our websiteâ€™s String Trimmer Repair Help.
Need help finding your string trimmer’s model number? Here’s a helpful video:
String trimmer safety
- Always use safety glasses, as pebbles and debris can be propelled at high speeds.
- Keep pets and people at least 200 feet away when string trimmers are in operation
RepairClinic.com has troubleshooting and repair help information for string trimmers. With your string trimmerâ€™s model number in hand, head to RepairClinicâ€™s Repair Help information. RepairClinic has replacement parts for string trimmers including air filters, fuel lines, spark plugs and many others. Click here to shop.