Shipping all 7 days! Hold times are long. Already ordered? Email [email protected]Learn more

9 Tips For Washing Machine Care

9 Tips For Washing Machine Care

1.)  Inspect the hoses.

A couple of times monthly, check your washing machine’s water hoses for signs of wear or weakness. If you discover any cracks or blistering, replace the hose. Any damage could cause a leak or burst – and extremely expensive flood damage in your home.

Most manufacturers recommend replacing the hoses every five years.

RepairClinic stocks many types of hoses designed specifically for your washing machine model. Have your model number ready and enter into our website search bar.

For more peace of mind, use high-quality, stainless steel hoses.

2.) Prevent flood damage.

In the event that your washing machine’s fill hoses burst or water level switch malfunctions, you’ll have instant water damage in the room.

In our homes, we use these two products to prevent this:

Water Shutoff System

This water shutoff system prevents water damage by automatically shutting off the water flow when a malfunction is detected. Installation can be completed in five minutes. No special tools are needed.

Washing Machine Overflow Pan 

This popular plastic pan fits beneath a washing machine and will protect a floor from water damage due to overflow and leakage. It has a fitting to accommodate drain line attachment. Inside dimensions: 27 x 30 x 2

3.) Don’t overload it.

Follow the owner’s manual’s instructions for appropriate loading sizes. Oversized loads will throw the machine off balance and that will lead to problems.

4.) Keep it level with leveling leg pads.

It’s abnormal for washing machines to vibrate the floor and walls of your laundry room. If your washing machine is not exactly level, with all four legs on the floor, it may rock back and forth and vibrate strongly.

It’s best to keep the machine as close to the floor as possible. The closer the machine sits to the floor, the less it will vibrate.

The front legs are adjustable with a locknut. Position the legs at the desired height and tighten the lock nut against the body of the machine so that the legs cannot rotate.  Some models also have adjustable legs in the rear, too.  Follow the same process for adjusting those.

It is more common for machines to have self-adjusting rear legs. Ask someone to assist you with this. Tilt the machine forward on its front legs so that the rear legs are three to four inches from the floor. When you set the machine back down to rest all on all four legs, the legs should adjust automatically. If you find that they are not level, tilt the machine forward again and tap on the rear legs with the handle of a hammer to loosen them.

5.) Easy on the soap.

Regardless of what’s recommended on detergent packaging, follow your owner’s manual for the manufacturer’s recommended amount of detergent.

6.) Clean the inside once monthly.

It’s common for detergent residue to build up inside of washing machine tubs. We use this cleaner once per month to keep our high-efficiency washing machines free of odor-causing residue.

7.) Clean out the fabric softener dispenser.

Gooey in nature, liquid fabric softener is known to gum up along fabric softener dispensers. Use a damp rag and hot water to clean out this periodically.

8.) Polish the outside.

Spilled detergent, stain remover and fabric softener dries to a sticky mess.  This all-purpose cleaner will make cleaning easy.

9.) Touch up gashes and scrapes with paint.

Prevent rusting by taking care of gashes and scrapes right away using touch-up paint.

 Remember, Repair Clinic has millions of appliance parts available for same-day shipping with a 365-day return policy.

Enter model number for recommendation

Log in to choose from Saved Products.

VIP Email List

Join our VIP Email List and get discounts and money-saving tips today: