Price Match Guarantee
Order by 2:00 a.m., and we'll ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment Repair>Craftsman Riding Mower Grass Deflector Pin Retainer 532110452
Craftsman Riding Mower Grass Deflector Pin Retainer 532110452
Skill Level
Total Parts Cost
$4.37Estimated Savings
$112.5002:10
- Description
This video provides step-by-step repair instructions for replacing the grass deflector pin retainer (or push nut) on a Craftsman riding lawn mower. The most common reasons for replacing the pin retainer are when it is missing or damaged.
All of the information for this grass deflector push nut replacement video is applicable to the following brands:
Craftsman, Husqvarna, Ariens, Poulan, Weedeater, Murray, Dixon
Tools needed: 3/8 inch socket, ¼ inch socket or nut driver, 5/16 inch socket or nut driver
All of the information for this grass deflector push nut replacement video is applicable to the following brands:
Craftsman, Husqvarna, Ariens, Poulan, Weedeater, Murray, Dixon
Tools needed: 3/8 inch socket, ¼ inch socket or nut driver, 5/16 inch socket or nut driver
Step By Step Instructions
1
To make it easier to replace the grass deflector pin retainer on your riding mower, we recommend removing the deflector first.
2
Before you do this, make sure the ignition switch is in the “off” position and the key has been removed.
3
Confirm that the mower deck is at its lowest position.
4
Now lift up the deflector and support the bottom of the mounting bolts as you use a half-inch socket to unthread the nuts.
5
Remove the bolts and pull the deflector free.
6
Use vice-grip pliers to secure the pin as you use a large flat-head screwdriver to pry the old retainer off.
7
You’re now ready to install the new pin retainer.
8
Support the pin and use a 7/16th inch socket and hammer to fully seat the new retainer.
9
Insert a mounting bolt through the bottom of the mower deck then reposition the deflector.
10
Thread a nut to secure the bolt.
11
Insert the second mounting bolt then support the bolts as you finish threading the nuts and tighten.
Description
This video provides step-by-step repair instructions for replacing the grass deflector pin retainer (or push nut) on a Craftsman riding lawn mower. The most common reasons for replacing the pin retainer are when it is missing or damaged.
All of the information for this grass deflector push nut replacement video is applicable to the following brands:
Craftsman, Husqvarna, Ariens, Poulan, Weedeater, Murray, Dixon
Tools needed: 3/8 inch socket, ¼ inch socket or nut driver, 5/16 inch socket or nut driver
All of the information for this grass deflector push nut replacement video is applicable to the following brands:
Craftsman, Husqvarna, Ariens, Poulan, Weedeater, Murray, Dixon
Tools needed: 3/8 inch socket, ¼ inch socket or nut driver, 5/16 inch socket or nut driver
Step-By-Step Instructions
1
To make it easier to replace the grass deflector pin retainer on your riding mower, we recommend removing the deflector first.
2
Before you do this, make sure the ignition switch is in the “off” position and the key has been removed.
3
Confirm that the mower deck is at its lowest position.
4
Now lift up the deflector and support the bottom of the mounting bolts as you use a half-inch socket to unthread the nuts.
5
Remove the bolts and pull the deflector free.
6
Use vice-grip pliers to secure the pin as you use a large flat-head screwdriver to pry the old retainer off.
7
You’re now ready to install the new pin retainer.
8
Support the pin and use a 7/16th inch socket and hammer to fully seat the new retainer.
9
Insert a mounting bolt through the bottom of the mower deck then reposition the deflector.
10
Thread a nut to secure the bolt.
11
Insert the second mounting bolt then support the bolts as you finish threading the nuts and tighten.
Applicable Product Model
Parts Needed
Retainer
$4.37
Total$0.00
Related Articles & Videos
05:37
Part Replacement
Craftsman Riding Mower Blades Won't Engage? Clutch Cable 584243501
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com