Price Match Guarantee
Order by 2:00 a.m., and we'll ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment Repair>Kitchenaid Electric Slide-In Range Control Panel Replacement #W10920246
Kitchenaid Electric Slide-In Range Control Panel Replacement #W10920246
Skill Level
Total Parts Cost
$425.03Estimated Savings
$112.5006:40
- Description
This video provides step-by-step instructions for replacing the control panel on a Kitchenaid electric slide-in range (model #KSEB900ESS2). The most common reason for replacing the panel is if it is damaged.
All of the information in this panel replacement video is applicable to the following brands: Maytag, Amana, Magic Chef, Whirlpool, Tappan, Estate, Kitchenaide
All of the information in this panel replacement video is applicable to the following brands: Maytag, Amana, Magic Chef, Whirlpool, Tappan, Estate, Kitchenaide
Step By Step Instructions
1
KitchenAid Electric Slide-In Range - KSEB900ESS2
2
Electric Range Control Panel Replacement
3
Tools needed: Phillips-head screwdriver
4
Shock
5
Be sure to unplug the power cord or shut off the power supply.
6
Open the oven door and use a Phillips-head screwdriver to unthread the screws securing the control panel?s lower cover.
7
Shock
8
Remove the cover.
9
Next, unthread the two screws securing the control panel to the frame.
10
Place a towel on the cooktop surface then detach the control panel and rest it on the towel.
11
Disconnect the display board wire connecter and the touch-pad ribbon connecter.
12
Note the orientation of the four control knobs, then pull them off of the switch stems.
13
Unthread the screws securing the control knob bezels and the surface element switches to the control panel.
14
Detach the indicator lights and pull out the jewels.
15
Next, unthread the five screws securing the display board mounting bracket and protective covers.
16
Remove the screws to detach the two end caps.
17
You?re now ready to prepare the new control panel for installation.
18
Align the two end caps and secure them with the screws.
19
Position the display board and mounting bracket, align the protective covers, then thread and tighten the screws.
20
Insert the two jewels, then clip the indicator lights onto the jewels.
21
Confirm the gaskets are aligned on the switch stems, then position the switches in the new control panel.
22
Align the bezels with the red markings on top, then thread and tighten the screws to secure.
23
Slide the control knobs onto the appropriate switch stems.
24
Connect the wire connecter to the display board and the ribbon connecter to the touch-pad.
25
Now align the control panel on the front brackets.
26
Secure it with the screws.
27
Replace the lower cover, then thread the screws to secure.
28
Plug the power cord back in or restore the power supply and the electric range should be ready for use.
Description
This video provides step-by-step instructions for replacing the control panel on a Kitchenaid electric slide-in range (model #KSEB900ESS2). The most common reason for replacing the panel is if it is damaged.
All of the information in this panel replacement video is applicable to the following brands: Maytag, Amana, Magic Chef, Whirlpool, Tappan, Estate, Kitchenaide
All of the information in this panel replacement video is applicable to the following brands: Maytag, Amana, Magic Chef, Whirlpool, Tappan, Estate, Kitchenaide
Step-By-Step Instructions
1
KitchenAid Electric Slide-In Range - KSEB900ESS2
2
Electric Range Control Panel Replacement
3
Tools needed: Phillips-head screwdriver
4
Shock
5
Be sure to unplug the power cord or shut off the power supply.
6
Open the oven door and use a Phillips-head screwdriver to unthread the screws securing the control panel?s lower cover.
7
Shock
8
Remove the cover.
9
Next, unthread the two screws securing the control panel to the frame.
10
Place a towel on the cooktop surface then detach the control panel and rest it on the towel.
11
Disconnect the display board wire connecter and the touch-pad ribbon connecter.
12
Note the orientation of the four control knobs, then pull them off of the switch stems.
13
Unthread the screws securing the control knob bezels and the surface element switches to the control panel.
14
Detach the indicator lights and pull out the jewels.
15
Next, unthread the five screws securing the display board mounting bracket and protective covers.
16
Remove the screws to detach the two end caps.
17
You?re now ready to prepare the new control panel for installation.
18
Align the two end caps and secure them with the screws.
19
Position the display board and mounting bracket, align the protective covers, then thread and tighten the screws.
20
Insert the two jewels, then clip the indicator lights onto the jewels.
21
Confirm the gaskets are aligned on the switch stems, then position the switches in the new control panel.
22
Align the bezels with the red markings on top, then thread and tighten the screws to secure.
23
Slide the control knobs onto the appropriate switch stems.
24
Connect the wire connecter to the display board and the ribbon connecter to the touch-pad.
25
Now align the control panel on the front brackets.
26
Secure it with the screws.
27
Replace the lower cover, then thread the screws to secure.
28
Plug the power cord back in or restore the power supply and the electric range should be ready for use.
Applicable Product Model
Related Articles & Videos
04:14
Part Replacement
Kitchenaid Electric Slide-In Range Oven Bake Element Replacement #W10779716
02:11
Part Replacement
Kitchenaid Electric Slide-In Range Left Warming Drawer Rail Replacement #W11131365
08:20
Part Replacement
Kitchenaid Electric Slide-In Range Control Board Replacement #W11128223
05:55
Part Replacement
Kitchenaid Electric Slide-In Range Cooling Fan Replacement #W11107275
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com