Price Match Guarantee
Order by 2:00 a.m., and we'll ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment Repair>GE Refrigerator Humidity Control Slide Replacement WR02X10633
GE Refrigerator Humidity Control Slide Replacement WR02X10633
Skill Level
Total Parts Cost
$12.67Estimated Savings
$112.5001:58
- Description
This video provides step-by-step repair instructions for replacing the humidity control slide on a GE Refrigerator (Model GSE25GSHPCSS). The most common reason for replacing this part is if it is damaged or missing.
All of the information for this video is applicable to the following brands: GE
All of the information for this video is applicable to the following brands: GE
Step By Step Instructions
1
To replace the humidity control slide in this GE refrigerator…
2
… you will need a small flat-head screwdriver.
3
Open the refrigerator door and fully remove the middle drawer.
4
Next, remove the glass shelf from the middle drawer frame.
5
Now lift the front of the frame up and pull forward to remove..
6
Insert the small flat-head screwdriver into the slots to release the tabs securing the old humidity control slide, if still intact.
7
To install the new humidity control slide…
8
… align the rear edge under the retaining tabs then confirm the humidity control lever actuator tab is aligned with the slide notch as you snap the front edge of the slide into place.
9
Now realign the frame’s rear notches over the rear liner support posts and lower the frame onto the front posts.
10
Reinsert the glass shelf into the frame.
11
Replace the middle drawer…
12
… and the refrigerator should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the humidity control slide on a GE Refrigerator (Model GSE25GSHPCSS). The most common reason for replacing this part is if it is damaged or missing.
All of the information for this video is applicable to the following brands: GE
All of the information for this video is applicable to the following brands: GE
Step-By-Step Instructions
1
To replace the humidity control slide in this GE refrigerator…
2
… you will need a small flat-head screwdriver.
3
Open the refrigerator door and fully remove the middle drawer.
4
Next, remove the glass shelf from the middle drawer frame.
5
Now lift the front of the frame up and pull forward to remove..
6
Insert the small flat-head screwdriver into the slots to release the tabs securing the old humidity control slide, if still intact.
7
To install the new humidity control slide…
8
… align the rear edge under the retaining tabs then confirm the humidity control lever actuator tab is aligned with the slide notch as you snap the front edge of the slide into place.
9
Now realign the frame’s rear notches over the rear liner support posts and lower the frame onto the front posts.
10
Reinsert the glass shelf into the frame.
11
Replace the middle drawer…
12
… and the refrigerator should be ready for use.
Applicable Product Model
Parts Needed
Drawer Slide Rail Cover
$12.67
Recommended Tools and Accessories
Cooktop Cleaner
$30.19
Total$0.00
Related Articles & Videos
01:40
Part Replacement
GE Refrigerator Dispenser Display Control Assembly Replacement WR55X34887
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com