GE Refrigerator GSE25GGHJCWW Parts

Refrigerator or freezer temperature sensor (also called a thermistor). The thermistor monitors the refrigerator, freezer, and evaporator temperature and sends the temperature reading to the control board.

Refrigerator icemaker kit, The kit includes the fill cup, 4 pin wire harness adapter, and tube. If the icemaker is not working, make sure the freezer temperature is around zero degrees Fahrenheit. If the refrigerator temperature is correct, the icemaker or water valve could be defective.

Board led light asm

The GE Defrost Heater and Bracket Assembly WR51X10055 is a high quality OEM part that melts frost from the evaporator fins during automatic defrost cycles. It is also known as the Refrigerator Glass Tube Defrost Heater and Bracket Assembly. Disconnected from all utilities prior to repair.

Water tank in refrigerator for chilled water dispenser

Two wire door switch for interior light

Door handle stud screw

GE MWF water filter reduces up to 94% of contaminants including lead, chlorine, and asbestos. Replace every 6 months.

If you have never installed this new style filter or your old filter was made by Culligan you may need the adapter to install it, see Related Items below.

Water line quick connector. Connects two 5/16 lines

Evaporator fan blade

Evaporator fan motor with harness & thermistor

This dispenser door flap mounts in the ice dispenser.

Refrigerator run capacitor 12 uF. If this run capacitor is defective, the refrigerator will not run.

Refrigerator solenoid assembly for dispenser door. If the dispenser door does not close properly frost will start to form in the dispenser area.

High limit thermostat for defrost heater. *Closed for continuity at room temperature.