Shop replacement repair parts for Kenmore Dryer model 417.91142000

Dryer drum belt, length 88.75" x width 1/4". If the drum does not turn, but you can hear the motor running then there is a good chance the belt has broken.

Dryer rear drum bearing kit. The holes in the metal plate are not threaded. Use the self tapping screws in the kit to thread the plate. If the dryer is noisy then the rear bearing could be worn and require replacement.

Dryer gas valve solenoid coil kit. The kit includes both 2 and 3 wire coils. If the dryer does not heat or heats intermittently the gas valve coils may be defective.

Bearing cup for drum support ball

The Frigidaire Blower Wheel and Housing Assembly 131775600 is a high-quality replacement part that blows air through the dryer drum and out through the exhaust. It replaces several other part numbers. When repairing use caution. Consult the owner's manual for instructions and to verify part number.

Idler pulley assembly for dryer drum belt

Start switch, dryer, turn type

Dryer door switch, 3 wire

Idler Pulley Spring

Door strike

Flame sensor, radiant

High temp adhesive

Air duct seal

Frigidaire lint filter. This catches lint from your cloths during drying cycles

Screw, 10-16