Price Match GuaranteeKenmore Washing Machine 110.47512600 Parts
Shop replacement repair parts for Kenmore Washing Machine model 110.47512600
White Touch Up Paint
Adjustable leveling leg for washing machine. This leveling leg has a rubber foot. If the leveling leg is not adjusted properly, the washer will be off-balance and will vibrate or shake during operation.
Washing machine drain pump. *Coin trap only available with pump assembly. If the washer does not drain the pump could be locked up or a small object may be clogging it. Also a small leak in front of the washer could be caused by a defective pump.
Washing machine rubber door boot seal. Creates seal between front of washing machine and tub that holds the water. If the washer is leaking, the door boot may have a tear in it. Overloading the washer is the most common cause for a torn door boot.
Door strike attached to inner door panel
Spray Paint - White
Hose clamp, spring tension
Washer drain hose extension kit. Used to extend washing machine drain hose approximately 4 feet. *Also, order the required adapter to connect the extension to the existing drain hose.
Hose
Tub to pump hose
Heater sensor
Door lock latch
Boot seal front clamp ring
Boot seal rear clamp ring
Washing machine water inlet valve assembly. The water inlet valve opens to allow water to enter the washing machine. If the water inlet valve is defective, the washer may fill slowly or not fill at all.
Frequently Purchased Together For This Model
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic