Shop replacement repair parts for Frigidaire Washing Machine model GLTF2940FS2

Washer door strike. If the washing machine won't start, inpsect the actuator for damage. If the actuator is damaged the door will not latch properly and the washer will not turn on.

Door lock & switch assembly

Door boot seal

Washing machine drain pump. On some models you will need to configure the replacement pump to match the old pumps outlet port direction and reuse the old mounting bracket. If the washer does not drain then the drain pump may be clogged, damaged, or defective.

Shock mounting pin

Washer water inlet valve with thermistor. If the washer fills slowly or does not fill at all, then the water valve may be restricted and require replacement.

Washing machine shock absorber kit. The shock absorbers dampen the vibration of the washer tub. If one or more of the shock absorbers are worn out, the washer will vibrate or shake.

Gasket, dispenser-to-valve

Drain hose 98" long

Frigidaire 134370000 Drawer for Washing Machine. This part works with the following models: Frigidaire ATF6000ES0, Frigidaire ATF6000ES1, Frigidaire ATF6000FS, Frigidaire ATF6000FS0. Genuine replacement part.

Leveling leg

Screw, 10-16

Washer motor control board. This part contains the board, bracket, tape and screw mounted on control. NOTE: This part is often misdiagnosed.

Boot Seal Retaining Ring, Inner

Screw, pan head, 8-18b x 0.31