Price Match GuaranteeAmana Furnace GCI070X35A/P1155310F Parts
Shop replacement repair parts for Amana Furnace model GCI070X35A/P1155310F
Furnace flame sensor. The flame sensor monitors the burner to detect whether or not a flame is present. If the flame sensor is defective, the furnace may not heat.
Gas valve, 24v 3.5" wc
.43 Natural gas burner orifice
Panel latch 1/4 turn
RC Item #2646365
Ignition Control Board. The ignition control board regulates the supply of power to the furnace components. Be sure to check more commonly defective parts before replacing the control board.
Hot Surface Ignitor With 5-1/2" Leads, A Style Mounting Block, Sealed Combustion, Insulation 200°C, Electrical Connection, Molex Internal Keyed Connector with .093" Male Pins, Includes Gasket, Replaces R/S 41-401
Flame sensor
Manual reset limit switch
Screw-tc
Run capacitor single oval 370V 7.5uF
Grommet
Draft inducer motor, 115 volts, 3000 RPM. The draft inducer motor draws air into the burner and exhausts it out the flue. If the draft inducer motor is defective, the furnace may not heat.
Transformer 120V to 24V
RC Item #4445276
Zip tie
Frequently Purchased Together For This Model
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic