Shop replacement repair parts for LG Dishwasher model LDS5811WW/01

Dishwasher hinge cable. This cable connects the door hinge to the door spring.

Dishwasher lower dishrack roller and axle assembly with mounting clip.

Tub seal

Diverter motor for upper and lower spray arms

Replacement dishwasher drain hose. Per the manufacturer if the drain hose being replaced does not have the vent tube going to the water inlet assembly a new water inlet will be needed. Please see Recommended Parts for water inlet information.

Dishwasher water inlet valve. 120 Volt 60 Hz. AC.
If the dishwasher won't fill properly, then the water valve is likely restricted and will need replacement. If the dishwasher is under filling, it won't clean dishes effectively.

Gasket

Circulation or drain pump motor & impeller. This pump is found on both washing machines and dishwashers. On washing machines, this pump is used to circulate the water. On dishwashers, it is used to drain water from the dishwasher.

Upper dishrack assembly

Bush

Motor assembly for the circulation pump

Water flow sensor

Upper dishwasher dishrack roller and axle assembly. This roller clips onto the upper dishrack to allow it to move in and out of the dishwasher. Because these rollers generally wear out at the same time, we recommend replacing them in pairs.

Door hinge spring

Dishwasher heating element with thermistor. If the dishwasher isn't drying dishes properly, the heating element may be defective.