Shop replacement repair parts for Kenmore Range/Stove/Oven model 790.70119703

Appliance light bulb, clear 120 Volt 40 Watt Regular Base

Oven igniter with wire harness

Oven temperature sensor *May require cutting and splicing wire connector from old sensor onto new sensor with porcelain wire nuts

Oven control board. If the oven does not heat check if the oven igniter is glowing. If so, the board is likely good and the oven igniter is weak and will need to be replaced. If it is not glowing the igniter and gas valve can be tested. If they test ok, then the board is likely the problem.

Clock overlay, black. Clock control sold seperately

Inner oven door glass

Foot Assembly

Screw, igniter mounting

Power cord assembly, gas range

Leveling leg

Surface burner base, 9.5K

Oven anti-tip bracket kit. This bracket helps to secure the range and prevent it from tipping over.

This is a genuine replacement part. Gasket 316239700 Frigidaire gasket seal.

Spark module

Screw, 8-18 x 0.5, chrome