Price Match GuaranteeKelvinator Dryer DEA500G2D Parts
Shop replacement repair parts for Kelvinator Dryer model DEA500G2D
Dryer rear drum bearing kit. The holes in the metal plate are not threaded. Use the self tapping screws in the kit to thread the plate. If the dryer is noisy then the rear bearing could be worn and require replacement.
Dryer thermal limiter (or thermal fuse). May be located on the blower housing or element. If the dryer overheats, the thermal fuse blows to cut off power to the dryer. If the thermal fuse has blown, the dryer won't start. The thermal fuse cannot be reset--if the fuse has blown, it must be replaced
Door Catch
Bearing cup for drum support ball
High temp adhesive
Air duct seal
Door strike
Main terminal block for power cord
Clip,top-to-front
Drum drive belt, flat
Condenser coil cleaning brush
Door catch kit
Cycling thermostat with bias heater
Dryer power cord. This cord is 6 feet long 4 wire
Grounding ball
Frequently Purchased Together For This Model
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic